Titrace

There are four types of reactions

• Acid-base titration

Hydrogen ions are transferred from acid to base or hydroxide ions from base to acid, thus bringing about neutralization. The stronger the base or acid, the more well-defined the end-point of the reaction becomes.

• Precipitation titration

In this method, the component to be determined is usually precipated by the titrating agent in the form of an insoluble compound. The end-point can be determined by the appearance of a clear solution or by measuring the conductivity

• Complexation titration

Here, ions combine with other ions or molecules to form soluble complexes that show little dissociation 

• Redox titration

In this method, electrons are transferred from reducing agents to oxidation agents

We can find 3 types of indirect titration

• Back titration

A defined volume of excess reagent solution is added to the sample solution. Once the reaction is complete, the unreacted reagent solution is titrated using a second reagent solution 

• Indirect titration

The substance to be determined doesn’t react directly with the reagent solution but indirectly via the intermediate of a stoichiometric reaction with an another titrable substance

• Substitution titration

In this method, a substance is added to the sample whereby the latter reacts stoichiometrically, whilst releasing a component of the added substance. This component is then titrated directly.

Due to its versatility, volumetric analyses can be used for the determination of a large number of organic and inorganic compounds. Titration is often described for the determination of content in standard works of reference such as pharmacopoeias, DIN references, ASTM or food analysis methods.

This method is one of the oldest and most frequently used methods for quantitative analysis

• Low cost of apparatus
• Simple working procedures
• Ease of automation
• Quick analysis 
• Excellent reproducibility
• Accuracy of the results

3 different packs are available

• Ampoules Convol NORMADOSE

These concentrated solutions for the preparation of volumetric solutions are supplied in glass or plastic ampoules produced in such way that the precisely dosed content can be quantitively transferred to a volumetric flask. They represent an economical and space-saving alternative to ready to use solutions and have a long shelf life in unopened ampoules

• Classical bottles from 100 ml to 25l.

The big majority of the “ready to use “ solutions are packed in plastic bottles. The most commonly used small pack is the 1l bottle. Comparing to the ampoules, the main advantages for such packaging are a better accuracy and no risk of mistake during the preparation.

• Bag in box

For large volume, we can supply 10 or 5l bag in box packagings. Here, air-free filling with withdrawal from the cubitainer ensure that the quality of the volumetric solution is not affected until the last drop.

Yes, we have created a custom manufacturing service to produce the wished solution
You will see the link below:
https://sk.vwr.com/cms/chemicals_vwr_custom_manufacturing_services

NIST traceable calibration is an assurance program that certifies that a laboratory or manufacturer is fully equipped to calibrate equipment to National Institute of Standards and Technology (NIST) standards and that any products offered by that manufacturer will match those NIST-maintained measurement standards.

• The titer of volumetric solutions can drift, so periodic verification is advisable, especially for extremely diluted solutions. Using these reference standards provides peace of mind and integrity of results. ‒ Traceable to NIST
• High purity
• Supplied with Certificate of Analysis for quality assurance
• Glass packs in opaque cardboard box to prevent deterioration due to light